Fire Alarm & Life Safety

  • Compatibility Compatible with C-TEC's ActiV range of conventional fire alarm devices. For the contents of this kit, see Kit Contents section below.
    Total output current limited to 100mA
    Battery charge capacity 2Ah.
    Quiescent current 5mA.
    Max battery size and type 2Ah Li-Ion battery supplied (replaceable, up to 10 year life).
    No. of detector zone circuits 1.
  •  
  •  

HUSH-ACTIV BS 5839-6 Grade C Stand-Alone Domestic Fire Alarm Kit

 
  • A new Grade C domestic fire detection & alarm system to BS 5839-6 (2019) for use in individual flats, houses and apartments.
  • Supplied as a cost-effective kit for ease of specification.
  • Includes a Hush-ActiV central controller, a 230V/24V PSU, one ActiV heat detector, two ActiV multi-sensors, three ActiV detector bases and an ActiV alarm sounder (additional ActiV devices available for larger systems).
  • Monitored for battery, power supply, detector removal & open/short circuit faults.
  • Low-level system controller facilitates compliance with the Equality Act.
  • Controller includes a replaceable 72 hour standby battery that lasts over 10 years in normal usage.
  • Can be used in any situation where Grade D Mains/Battery Alarms are specified.
  • Kits with a different mix of fire detectors also available.
  • Approvals/certifications Certified to EN54 Parts 11by the LPCB and 13 by the BSI.
    Supply/operating voltage 4.5-30Vdc
    Product dimensions (mm) 87 W x 88 H x D 62mm (includes back box).
    Construction & finish Red ABS.

Manual 'No Break' Call Point, surface

  • Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
  • Smooth-action resettable element mimics the feel of breaking glass.
  • Supplied with a red back box, reset key and ‘Not in Use’ label.
  • Red LED ‘alarm ring’ illuminates call point face upon activation.
  • Photoluminescent operating window remains visible for up to 5 minutes.
  • Note an additional BF370SFP red flush mounting plate is required if you wish to flush mount the BF370S.
  • IP66 weatherproof version (order code BF370S/W) also available.
  • Water and dust resistant (IP67)
  • Dual outputs (HDTVI and CVBS signals output simultaneously)
Approvals/certifications Certified to EN54-5 by Intertek (0359-CPR-00183).
Application/operation Generates an alarm condition when it detects a temperature of between 54ºC & 65ºC.
Application temperature 25°C typical, 50°C max.
Static response temperature 54°C min, 65°C max.
Supply wiring 2-wire monitored, polarity sensitive.

ActiV Standard 60ºC Fixed Temp. Heat Detector

  • A high-quality Type A2 standard fixed temperature (60ºC) heat detector offering outstanding detection performance at a very competitive price.
  • Manufactured by C-TEC in the UK.
  • Third-party certified to EN54-5 by Intertek.
  • Wide 6-33V DC operating voltage.
  • Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
  • Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
Approvals/certifications Certified to EN54-3 & 23 by the LPCB.
Protocol/compatibility Compatible with C-TEC's CFP, FP, MFP and EP203 conventional fire alarm panels and virtually all other makes (testing on third-party panels is recommended before use)
Application/operation Designed to be wall mounted. Indoor areas only.
VAD category & coverage N/A
Flash rate & colour N/A
Supply/operating voltage 18 to 30V DC.

ActiV Conventional Hi-Output 100dB(A) Wall Sounder (shallow base)

  • LPCB certified to EN54-3 (Sounders).
  • Impressive 100dB(A) sound output @ 1m.
  • Includes 31 selectable primary tones and an optional secondary tone.
  • Two volume levels (high and low)
  • Alarm Current at 30Vdc = 5.5mA. 
  • Alarm Current at 18Vdc = 3.8mA.
  • IP21C rated.
  • Manufactured in the UK by C-TEC.